Betro-Lock® Type Quick-Lock
Plug designed for quickly and easily, closing and opening of pipes. The tee wrench is hinged and can be tightened by an eccentric in it. Exists in all standard sizes, in addition to the non sparking one.
Betro-Lock® Type Quick-LockBetro-Lock® Type Standard Sealing Plug
The plug shapes the stock in the set, and exists of a tee wrench made in acid resistant steel with sweeping and 3/8"R internal screw-threads for installation of pressure gauge for control of potential posterior pressure. Can also be used to insert gas or fluid media into the plug. The top disk in this set has a greater diameter than rubber sleeve, for impacts against the end of the pipe.
Betro-Lock® Type Standard Inside Plug
The plug is equal to the standard sealing plug, but has the same diameter on the top and bottom disk, i.e. the same diameter on the rubber sleeve. This one is used whereever it is necessary to get the plug deeper into the hole.
Betro-Lock® Type Non Sparking
Plug designed for explosive environments. The metal parts in the plug are either made of brass or stainless steel casted in rubber. May also be delivered with synthetic rubber sleeve for use in aggressive chemical or solvent based environments.
Betro-Lock® Type Sealing Plug w/claw
The product set is designed to tighten weep holes (scupper holes) in ship decks etc. where the hole is secured with in-welded cross pin or cross. The claw is designed to grip around the cross pin or cross, and the plug is tightened with a hand wheel. The plug's rubber sleeve will then tighten towards the surface surrounding the hole.
Betro-Lock® Type Sealing Plate w/crossbar
The plates is used to tighten holes and notches in tanks and bulkheads. Especially used to tighten weep holes along the reeling edge on ship decks. The plates are given neoprene cellular rubber to get maximum connection with the tightening surface.